![]() ![]() Step 14: Position the belt on the pulleys. Reinstall the electrical connectors as they originally were. Step 13: Reinstall the electrical connectors. Reinstall the lines and tighten down the bolts the line bolts. Reinstall the mounting bolts and tighten them down. Lower the new compressor into the vehicle and align it with the mounting holes. Step 10: Lower the new compressor into the vehicle. Some compressors will come with replacement o-rings, or your can get replacements from your local auto parts store. Use a small screwdriver or pick to remove the o-rings from the A/C pressure lines. Step 9: Replace the pressure line o-rings. Most compressors use PAG oil, but a few use Polyol Glycol, so it’s important to determine which is used in your vehicle.Īlso, some compressors come with the oil already installed read the instructions supplied with your compressor. Then remove the dust caps from the new compressor and add a small amount of recommended lubricant to the new compressor (usually around ½ ounce). ![]() Compare the new compressor to the old one to ensure they are the same. It should come out with a little tugging, but be careful because it is often heavy. Step 7: Remove the compressor from the vehicle. Using a ratchet or wrench, remove the compressor mounting bolts. Step 6: Remove the compressor mounting bolts. Plug them to prevent system contamination. Using a ratchet or wrench, disconnect the pressure hoses from the compressor. Step 5: Disconnect the pressure hoses from the compressor. Step 4: Disconnect the electrical connectors from the compressor. While holding the tensioner away from the belt, slide the belt off the pulleys. Step 3: Remove the belt from the pulleys.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |